 |
Alarm with Level Sensor and/or Flow
Sensor
and/or Auxilary Relay Outlet |
- Level
sensor: to be laid in the tank of sodium hypochlorite, to be connected to an
alarm which turns on when the liquid level in the tank is not enough.
- Flow sensor to be placed in the discharge hose of the proportioning pump,
activating the alarm if there is any obstruction in the fluid outlet.
- Relay auxiliary outlet (no voltage): to connect a remote alarm signal to
the alarm central, PLC, general switchboards, etc. |
 |
Electrodes: pH, Rx, Cd |
- To operate
an automatic control pump of one of these variables.
- Epoxy resin body, for pressures up to 7 bar, and maximum temperature of 90ºC.
- Includes 15 mts. shielded coaxil wire and BNC connectors. |
 |
Electrodes assembly |
- Piping:
1/2" thread PVC and neoprene tightness joints.
- Mesures inside a tank or cistern: PVC pipe in 45 cm sections up to 1.5 m
with their tightness items. |
 |
Flowmeter |
| - Pulse per
liter from 1/2" to 8", with flow totalizer. It is used to operate pumps
proportionally to pulses.
|
 |
Valves |
- Standing,
Injection, Safety, Counterpressure, Antisiphon.
- PVC or AISI 316 bodies, resisting 10 to 80 bar pressures, and 10 to 1100
l/h flows. |
 |
Polyethylene Tank |
- Made with cover and UV
protection.
- 20 lts. to 3000 lts. capacity.
|
|
